VISIOMED bewell connect MyTensio BW-BA1, User Manual

Page: 15 / 52

BewellConnect - BW-BA1 - User Manual - 122016V1 15
7. SPECIFICATIONS
Product name BewellConnect® My Tensio
Model BW-BA1
Classification Classe II
Measuring method Oscillometric System
Dimensions 2.1 x 0.9 x 5.3 in / 55 x 23 x 135 mm - Cuff 8.6 -14.1 in / 22-36 cm
Weight 0.38 pounds / 175 g
Measuring range Cuff pressure : 0~299 mmHg
Heart rate: 40~180 beat/min
Accuracy Pressure : ± 3mmHg
Heart rate: ± 5%
Inflation Electric pump inflation
Deflation Pressure release value
Working Temp.
& humidity
Temp : 50~ 104 °F / 10 - 40°C
Humidity : 15~90% RH
Storage Temp.
& humidity
Temp : -4~140°F / -20~60°C
Humidity : 10~95% RH
Pressure : 80~105 Kpa
Technology Bluetooth 4.0
Bluetooth LED Appliance on : Lit LED
Low battery : Flashing LED
Charging : Lit LED
Battery LI-ion Rechargeable battery (650mAh)
Battery life ± 250 measurements
USB USB 2.0 port
Voltage 3.7V
Supplied with 8.6~14.1 in / 22 - 36 cm armband, instruction manual, storage case,
31.4 in / 800 mm USB cable
8. TROUBLESHOOTING
If you have one of the following problems, please refer to this breakdown service guide to help
resolve the problem. If the problem persists, please contact our customer service.
PROBLEM POSSIBLE CAUSE SOLUTION
Abnormal results
The armband is not
positioned correctly or
not tight enough
Put the armband on correctly and try again
Incorrect position dur-
ing measurement
Reread “Instructions” and retry
You spoke, moved or
were agitated,
excited or nervous dur-
ing measurement
Try again when you have calmed down. Do not
speak or move during test.
Arrhythmia
The device is not suitable for people suffering
from serious heart arrhythmia
The blue
Bluetooth LED is
not lighting up or
flashing
Low battery Charge up device with USB cable
No data transfer to
your mobile phone/
tablet
Bluetooth connection
deactivated
Activate bluetooth on your mobile/tablet
Incompatible mobile
phone or tablet
Check your mobile phone or tablet has Bluetooth
4.0
The 3 measurements
don’t complete, the
measurement stops.
Poor contact with the
armband.
Connection issue be-
tween the device and
mobile phone.
Retake measurement.