Vishay Micro-Measurements
System 7000 Programmer’s Reference Manual
Page 70 of 142
6.5.3.10 StartSynchronizedScanning Method
Syntax:
HRESULT _stdcall StartSynchronizedScanning(out retval long * result );
Description:
This method starts synchronized scanning on a synchronized network. On a synchronized
network, the StartScanning command prepares for scanning, but waits until this command is
executed before actually scanning
Arguments:
None
Returns:
0 if Successful, otherwise an Error Code
Notes:
This command must only be sent to the scanner designated as the Master. All cards in the
synchronized network must be issued the StartScanning method before this command is executed.
