Visel Italiana MD3, Manual

Page: 6 / 16

MD3 - User manual
(A) Telephone sockets for connection to slave display,
console or Voice module;
(B) Function and codification key;
(C) Connection socket to external power supply .
ATTENTION: Read this manual before using the product .
Installation unit: Put the metal holder to the wall and fix
the display
. The length of the cable is approximately 2
meters .
Display configuration: Pressing shortly the push button
(B) on the backside the display will put to ZERO and
visualize:
1) 7 segment test (number 88);
2) Beep tone test;
3) Display codify (C0, C1, C2… C15, SL);
4) Numbers presentation (F1, F2);
5) Acoustic tone mode (S1, S2-mute, S3);
6) Stand-by (t0 off, t1 on - 15 minutes);
Pressing the button (B) it's possible to go directly to
point 3,4,5 and 6
.
To modify the standard configuration choose the desired
codify (C, F, S, t) and release the button
.
At each cycle correspond ONE codify . To program code
1 press the button until the display will show C1 and
codify the remote control
. This function is useful when
there are two or more systems in the same area (e . g . in
a supermarket) . After this it's possible to make another
codify . To set stand-by function press the button until
the indication t1 and then release it . In this way the
display will put off automatically after 15 minutes of inac-
tivity
. At the next call from the remote it will visualize the
last number shown .
e n g l i s h