59
Advanced Manual - Viscount
Prestige
RECORD:NEWSONG
Tempo:120
Meas:
1
PED:REC CHR:REC GRT:REC SWL:REC CM:REC
RECORD:NEWSONG
Tempo:120
Meas:
1
Ped:REC
Great:REC
Swell:REC
Comm:REC
Prestige 100 - 80:
Prestige 70 - 60 - 50 - 40:
consisting of the following fields:
o
RECORD:
this displays the name of the MIDI sequence being recorded. For each new recording,
the name “NEWSONG” will always appear, while during a multidubbing recording, the song’s
current name will be displayed.
o
TEMPO:
indicates the current metronome tempo. Locate the cursor on this parameter and use
the encoder if you wish to modify its value.
o
MEAS:
displays the bar (measure) reached in the recording.
o
PD/PED – CHR (only in models 100 and 80) – GRT/GREAT – SWL/SWELL – CM/
COMM:
these parameters set the status of the Pedal, Man.I, Man.II, Man.III and Common
tracks, as follows:
-
REC:
track being used to record the events performed on the organ.
-
- - -:
the selected track is not included in the recording. The events performed on the relative
section are not recorded.
Then press [START-STOP] to start the recording. The sequencer will start with the number of
precount bars set earlier (-1 in default condition) and the Led of the [START-STOP] button will
flash in time with the current tempo set.
To modify the number of precount bars and the time signature, keep the [METRONOME] button
pressed for a few moments before starting to record, and follow the instructions provided in point
8.3.
Otherwise, use [RECORD] or [EXIT] before starting to record to exit the sequencer function and
return to display of the main video page.
after which it will show the video page used to set up the recording:
Summary of Contents for Prestige Organs
Page 2: ......
