62
Viscount - Advanced Manual
Prestige
8.2 PLAYING BACK A PERFORMANCE
To play back a song recorded using the sequencer, insert the floppy disk in the drive and press
[PLAY]. The system will proceed to read the floppy disk:
*** Reading disk contents ***
Please wait
after which all the songs (.MID files) saved on the disk will be displayed:
ERICSONG.MID SESSION1.MID RECORD_1.MID
RECORD_2.MID RECORD_3.MID
Use the [CURSOR] keys to select the song you wish to play and press [ENTER]. The display will
show the page:
PLAY:SESSION1
Tempo:120
Meas:
1
PED:--- CHR:PLY GRT:PLY SWL:PLY CM:PLY
PLAY:SESSION1
Tempo:120
Meas:
1
Ped:---
Great:PLY
Swell:PLY
Comm:PLY
Prestige 100 - 80:
Prestige 70 - 60 - 50 - 40:
As described in the previous point, the tracks which make up the song are identified by the PLY
code.
You may locate the cursor on the TEMPO parameter and then use the [VALUE] encoder to change
the tempo at which the MIDI sequence will be played.
Now press [START-STOP] to start playback of the performance recorded earlier. The LED of the
key starts to flash in time with the current tempo and Time Signature.
If you wish to stop playback temporarily (pause), press the [PLAY] button; press the same button
again to restart the song from the point where it was interrupted.
To stop the playback, press [START- STOP] again.
To exit the sequencer Play mode, press [EXIT] or [PLAY].
Summary of Contents for Prestige Organs
Page 2: ......