12
is important that the machine be cleaned carefully
after use with a jet of dry air. See that the power
supply lead is also kept in tip-top condition.
12. NOISE AND VIBRATION LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN
61029-1 and EN 61029-2-11 (TM43L) and EN 61029-
2-9 (TS48L) and serve as a basis for comparison with
other machines with similar applications.
The indicated vibration level has been determined
for the device’s main applications and may be used
as an initial value for evaluating the risk presented
by exposure to vibrations. However, vibrations
may reach levels that are quite different from the
declared value under other application conditions,
with other tools or with insufficient maintenance
of the electrical device or its accessories, reaching a
much higher value as a result of the work cycle or
the manner in which the electrical device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations,
such as maintaining both the device and its tools
in perfect condition and organising the duration
of work cycles (such as operating times when the
machine is subjected to loads, and operating times
when working with no-load, in effect, not in use, as
reducing the latter may have a considerable effect
upon the overall exposure value).
13. GUARANTEE
All VIRUTEX power tools are guaranted for 12 months
from the date of purchase, excluding any damage
which is a result of incorrect use or of natural wear and
tear on the machine. All repairs should be carried out
by the official VIRUTEX technical assistance service.
14. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic
waste. Recycle equipment, accessories and packaging
in ways that minimise any adverse effect on the
environment. Comply with the current regulations
in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the ac-
companying information, at the end of the product's
useful life it must not be disposed of with other
domestic waste.
In accordance with European Directive 2002/96/EC,
users may contact the establishment where they
purchased the product or the relevant local authority
to find out where and how they can take the product
for environmentally friendly and safe recycling.
In striving to constantly improve and update its
products, VIRUTEX reserves the riht to make any
modifications without prior notice.
F R A N Ç A I S
SCIE À ONGLET INCLINABLE
TM43L - TS48L
Important
Avant d'utiliser cette machine, lisez at-
tentivement la NOTICE D'INSTRUCTIONS
GÉNÉRALES DE SÉCURITÉ jointe à la
documentation qui l'accompagne.
Ayez toujours sous la main la NOTICE
ainsi que ce MANUEL D'INSTRUCTIONS
afin de pouvoir les consulter ulté-
rieurement.
1. CARACTÉRISTIQUES TECHNIQUES
Puissance absorbée...............................1.100 W
Moteur..................................................50/60 Hz
Vitesse à vide.........................................5.500 t/m
Dimensions du disque de scie:
diamètre extérieur...................................250 mm
diamètre intérieur.....................................30 mm
Plateau tournant:
orientable à droite et à gauche jusqu'à 45° avec po-
sitions fixes préréglées à: 0° - 15° - 22,5° - 30° - 45°
Bras basculant:
inclinable de 90° à 45° par rapport à la base, quelle
que soit la position du plateau, entre 0° et 45°, lorsque
celui-ci est orienté vers la gauche.
Poids.....................................................................18 Kg
Dimensions de l'emballage..............670x610x430 mm
Summary of Contents for TM43L
Page 41: ...41 Fig 1 Fig 2 Fig 3 Fig 4 Fig 6 Fig 5 Fig 8 Fig 7...
Page 42: ...42 Fig 15 Fig 16 Fig 14 Fig 12 Fig 11 Fig 13 Fig 10 Fig 9...
Page 43: ...43 Fig 23 Fig 24 Fig 22 Fig 20 Fig 19 Fig 21 Fig 18 Fig 17...
Page 44: ...Virutex S A Antoni Capmany 1 08028 Barcelona Spain www virutex es 4396348 052012...
