PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 53
8.9.4
Dismounting the rotor knife holders
WARNING
Danger of cutting caused by sharp knives, even when the ro-
tor is at a standstill.
Serious injury, particularly to hands and fingers, can result.
Wear protective gloves.
Proceed as follows:
Illustration:
(1) Rotor knife
(2) Knife mounting screw
(3) Knife holder
(4) Knife holder mounting
screws
Switch off the shredder at the main switch
Safeguard main switch using a padlock.
Open the lower housing flap.
Safeguard the housing flap.
Remove screen
Although it is possible to reach the cutting shaft by climbing into
the feeding chamber, we recommend accessing the knives
through the front side door. The shaft can be rotated manually by
turning the motor v-belt pulley.
Clean the hexagon head socket of the knife fixing bolt (2).
Loose the bolt using a high quality Allen key (10 mm). If necessary
knock the Allen key lightly with a hammer to loose it.
Take out the knife fixing bolt, the washer and the knife
Clean the hexagon head socket of the knife holder fixing bolts (4).
Loose the bolt using a high quality Allen key (6 mm). If necessary
knock the Allen key lightly with a hammer to loose it.
Take out the knife holder fixing bolts.
Remove the knife holder with the delivered Extractor.
1
2
4
3
