PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 48
Refilling lubricant
The grease reaches through the circulating grooves and bores via
lubrication nipples into the interior of the bearing.
The greasing quantity is 60 to 100 g roller bearing grease F3 per
bearing.
Illustration:
Grease nipple
Klemmenkasten
Replacing lubricant
Only in the case of unusual bearing noises or overheating is it also
necessary to renew the lubricant between the specified intervals.
Mounting and dismounting of the bearings is to be carried out in
accordance with the instructions in this operation manual (see
replacing the bearings).
Open the bearing.
Remove the bearing housing and the bearing cover.
Clean the bearing carefully using petroleum ether.
Petroleum ether, petroleum, spirit, aqueous neutral or alkaline
cleaning agents may be used to clean the bearings. After washing
out, the bearing must immediately be preserved using lubricant, in
order to avoid corrosion.
Fill bearing with approved lubricant (see
List of lubricants
).
