PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 55
8.9.5
Dismounting the stator knives
WARNING
Danger of cutting caused by sharp knives, even when the ro-
tor is at a standstill.
Serious injury, particularly to hands and fingers, can result.
Wear protective gloves.
Proceed as follows:
Illustration:
(1) Stator knife
(2) Knife holder
(3) Knife holder fixing
screws
(4) Knife adjusting screw
for pushing
(5) Knife adjusting screw for
pulling
(6) Cover plates
(7) Cover plate fixing
screws
(8) Cover plate holder fixing
screws
(9) Cover plate holder
Switch off the shredder at the main switch
Safeguard main switch using a padlock.
Open the upper housing flap.
Safeguard the housing flap.
Although it is possible to reach the knives by climbing into the
feeding chamber, we recommend accessing the knives through
the front side door.
Clean the hexagon head socket of the knife fixing bolts (2) and the
cover plates fixing bolts.
Loose the cover plate fixing bolts using a high quality Allen key (10
mm). If necessary knock the Allen key lightly with a hammer to
loose it.
Take out the bolts and the cover plates
Loose the knife adjusting screws for pulling and take them out
Loose the knife fixing bolts using a high quality Allen key (10 mm).
If necessary knock the Allen key lightly with a hammer to loose it.
Take out the knife fixing bolt, and the knife
3
6
1
2
9
7
4
5
8
