PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 34
6.3
Unloading and installing the machine
The machine or the machine components are packed so that they
will arrive to you safely. To see how the machine is packed or
should be packed, please see the
Packing plan
. For unloading the
packaged machine or machine components you may use a
suitable crane or forklift.
WARNING
Suspended load.
Falling loads can cause serious injury or death.
Only use a crane or a forklift which is suitable for the
weight and the dimensions of the load.
Also use a suitable stopping means and pay attention to
the gravity centre location.
Do not step under the suspended load.
Wear a safety helmet in addition to your basic protective
gear.
After unloading, remove the packaging material and all transporta-
tion safety devices.
In the case that the shredder and its accessory components have
been delivered as individual items, mount these at the site of ap
in accordance with the data given in the
Assembly drawing
. Only
in this way can it be guaranteed that there are sufficient delivered
piping parts, tubing and cable connections and that the linking
places match.
WARNING
Overturning or falling machine.
Serious injury or death can result.
In the case that you wish to erect the granulator over a pit,
on a frame or on a platform, you must secure the machine
by putting mounting screws through the holes on the
mounting pads (see Assembly drawing). If assembling the
machine on solid ground, this safety device is not abso-
lutely necessary.
Align the machine horizontally with the help of a suitable spirit lev-
el.
Do not use blocks to place underneath the machine, use instead
metal strips in order to prevent buckling of the base frame. Make
sure that an even distribution of weight is achieved on all the
points of support.
