EN
Virtufit Etappe 2.0i Spinbike
7
transport wheels on the front stabilizer point forward.
17
18
19
29
x4
S13
25
30
29
19
17
18
Install handlebar and display backrest.
NOTE!
Remove the steel tube and attachment parts from the main frame before attaching the front
and rear stabilizer. Make sure the transport wheels on the front stabilizer are pointing forward. Attach
the stabilizers to the main frame.
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoam and
the spinbike. Some parts (bolts, screws, etc.) are already attached to / in the spinbike.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The spinbike contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
STEP 1
ASSEMBLY INSTRUCTIONS
