EN
Virtufit Etappe 2.0i Spinbike
20
CODE
POSSIBLE CAUSES
INSPECTION
SOLUTION
E1
The motor is not operating
properly
Motor wiring plug is
properly inserted into
terminal or not
Connect plug or replace motor
Cable break in machine
Examine cable for defects
Replace the cable
The display has no
corresponding control
signal to the motor
Change the electronic console
E2
After starting the test in
body fat test mode, the
heart rate monitor is not
held by hand as soon as
possible
Hold the heart rate monitor by
hand within 3 seconds after
starting the test
The display cannot show
the heart rate value
Whether a heart rate value
is displayed in other modes
If still no heart rate value is
displayed in other modes,
replace the display; if still no
value is displayed, replace the
heart rate connector cable
NOTES!
• This screen must be equipped with a 9V/1A power adapter. When the screen displays abnormally
display, unplug and plug it back in.
• Without any operation, the console will go into standby mode after five minutes.
ERROR CODES
TROUBLE SHOOTING
