15
14 –
5.2 THROUGH THE “VF-Test&Calibrate” CONTROL PANEL
Requirements
• FSUIPC module for MFS or Prepar3D.
• Disable joysticks on MSF-Prepar3D.
FSUIPC Installation
In case you already have FSUIPC installed in your MFS-Prepar3D you
can skip this step.
• Go to the “FSUIPC” folder from the memory stick provided with
RUDDO.
• Execute the setup program according your MFS version (FSX-
Prepar3D or FS2004).
• When the installer ask about registering, Click on “Not now”.
Disable joysticks on MSF-Prepar3D
When you connect any Joystick “game devices” in the computer, au-
tomatically MFS-Prepar3D makes assignment on all the buttons and
axes.
To disable these assignments, you have two options:
OPTION 1: Disable all the Joysticks “game devices” that you have con-
nected in the computer:
• From the main MFS-Prepar3D splash screen, choose the “Settings”
option.
• Click on “Controls”.
• In the window that appears, go to the “Calibration” tab and disable
the “Enable controls” option.
OPTION 2: Disable only “Virtual-Fly RUDDO” assignments:
• From the main MFS-Prepar3D splash screen, choose the “Settings”
option.
• Click on “Controls”.
• In the window that appears go to the “Axes” tab.
• In the “Controller type” drop-down field, select “VirtualFly – RUDDO”
• Now, from the list press “Delete Assignment” in all the RUDDO Axis.
In both options, when you have finished, Close MFS-Prepar3D to ensu-
re that changes will be saved.
Summary of Contents for RUDDO
