36
© 2018 Directed. All rights reserved.
Automatic Remote Updates
The system sends a silent message to all remote controls after any
major action has occurred. When the remote receives this message it
updates the Arm status.
Out of Range
Each time a command is performed the Responder LE will expect a
command confirmation from the system. If a command confirmation
is not received the
AUX
and transmit LEDs flash and a long fault tone
plays as an alert.
No Remote Output
Occasionally when a command is performed the remote may not
generate a command confirmation output or Out of Range output.
This indicates that the system received the command but it was an
incomplete command (e.g. AUX button pressed too short to activate
the trunk release) or it was an illegal message (e.g. the command was
corrupted due to local RF interference). These are temporal nuances
of the system and remote, perform the command again within 10
seconds to return to normal operation.
Summary of Contents for 7857V
Page 1: ...O W N E R S G U I D E M O D E L 7857V NO ONE DARES COME CLOSE ...
Page 2: ......
Page 54: ......
