4
© 2018 Directed. All rights reserved.
Getting Started
Charging the remote control:
1. Plug the USB end of the provided USB cable into the USB port
on a computer. Insert the micro-USB connector into the micro-
USB port located on the side of the remote control. The LED
flashes to indicate the remote control is charging (The remote
remains operational while charging and can command the
system).
2. Once fully charged, the transmit LED will flash once every two
seconds.
3. The remote control is then ready for use. Disconnect the cable
from the remote control end first.
Note
To check the battery level,
press
the
AUX
AUX
button 5 times. The
LEDs turn on, from bottom to top to indicate the current bat-
tery charge.
Note
If the battery is excessively depleted when charging, func-
tionality may be delayed while it charges to the minimum
voltage required to operate the display, after which normal
charging resumes.
Keys to using this manual
Specific actions (in bold type) and style conventions are used consis-
tently throughout this manual, they are as follows:
•
Press:
implies
pushing in and releasing a button.
•
Hold:
is used after Press actions when a button needs to be held
in position for an extended period of time, typically several sec-
onds.
Summary of Contents for 7857V
Page 1: ...O W N E R S G U I D E M O D E L 7857V NO ONE DARES COME CLOSE ...
Page 2: ......
Page 54: ......