manualshive.com logo in svg

Viper 7857V, Owner'S Manual

Share
Download
Viper 7857V Owner'S Manual Download Page 33

29

© 2018 Directed. All rights reserved.

Advanced Start

The Advanced start features; Timer Start and Smart Start will automati-
cally start the engine to maintain battery charge or combat extreme 
cold when parked for an extended period of time. 
 

Precautions for the Advanced Start features: 

• 

Park

 the vehicle in a well ventilated area away from windows 

and doors that lead into inhabited spaces.

• 

Arm

/

Lock

 the vehicle, the engine will not start unless the doors 

are locked.

•  Only one Advanced start feature can be enabled at any given 

time.

•  For manual transmission vehicles MTS mode must be enabled 

before Timer Start or Smart Start can be activated.

•  Timer Start or Smart Start mode automatically exits when the ve-

hicle is disarmed.

Timer Start operation

 

Activation begins a countdown timer as set by the installer (default 
three hours). When the timer expires the engine starts and the Re-
mote Start ON message is sent to the remote control. When the 
Remote start runtime expires the engine shuts off, the Remote Start 
OFF message is sent to the remote control and the countdown 
timer restarts. This will repeat as many times as set by the installer 
(default 6 starts). Timer Start is exited after the final start.
 

Smart Start operation 

Smart Start uses the settings for Timer Start in addition to tem-
perature and battery level to automatically start the engine. Ac-
tivation begins the countdown timer. When the timer expires the 
vehicle interior temperature and battery level is checked and, if 

Summary of Contents for 7857V























































Reviews:

No comments

Brands by name

Popular brands

Load more brands