©
2005
Directed Electronics, Inc. all rights reserved
37
2-6 BYPASS NOTIFICATION ON/OFF:
When programmed On, if the door trigger input (zone
3) is active during arming the system will generate a bypass notification chirp. When programmed
OFF, no bypass notification chirps will be generated if zone 3 is active during arming. You would
need to set this feature OFF when connecting the door trigger wire to a vehicle with delayed
courtesy lights.
2-7 ENHANCED COURTESY LIGHT CONTROL:
This feature has four possible settings: Full,
Door Controlled, Ignition Controlled, and None.
FULL: The system incorporates both Door Controlled and Ignition Controlled features
(described below).
DOOR CONTROLLED: If turned on, a 30-second timer will start after the door has
been opened and then closed. If the door trigger (door open) remains active for longer
than 180-seconds, the timer will not activate for this cycle. If the ignition is turned on,
the timer will stop and the interior light will extinguish.
IGNITION CONTROLLED: If turned on, the system will turn on the interior light for
30 seconds when the ignition is turned off.
NONE: The system will pulse the interior light if the alarm is triggered and turn it on
for 30-seconds after the system is disarmed.
2-8 DOUBLE/SINGLE PULSE UNLOCK:
Some vehicles require two pulses on a single wire to
unlock the doors. When the double pulse unlock feature is turned on, the BLUE/BLACK H1/20
wire will supply two pulses instead of a single pulse. This makes it possible to directly interface with
double pulse vehicles without any extra parts.
2-9 DOUBLE/SINGLE PULSE LOCK:
Some vehicles require two pulses on a single wire to lock
the doors. When the double pulse lock feature is turned on, the GREEN/BLACK H1/17 wire will
supply two pulses instead of a single pulse. This makes it possible to directly interface with double
pulse vehicles without any extra parts.
2-10 COMFORT CLOSURE:
The system can be programmed to close the windows when the
system is armed. A 20-second output starts 200mS after the last lock
pulse. The Comfort
Closure output will be canceled if the unlock
button is pressed. If turned on, the lock output
wire will provide this function leaving the channel output wires to be used for other options.
NOTE:
Comfort Closure is deleted if one-time bypass is activated.
