30
©
2005
Directed Electronics, Inc. all rights reserved
Advanced Features Menu #2 and the siren will chirp twice and the LED will
flash twice. If the button is still not released, you will jump to Advanced
Features Menu #3 and the siren will chirp three times and the LED will flash
3 times. Once you have selected the desired menu, release the Valet/Program
button and then proceed to Step 4. If the button is still not released, you will
jump back to Basic Features Menu #1 and so on.
4. SSeelleecctt aa FFeeaattuurree.. Press and release the Valet/Program button the number of
times corresponding to the feature you wish to change. For example, to access
the second feature, press and release the button two times. Then press the
button once more and HOLD it. The siren will chirp and the LED will flash
the number of times equal to the step you have accessed.
5. PPrrooggrraam
m tthhee FFeeaattuurree.. While HOLDING the Valet/Program button, you can
toggle the feature on and off using the remote transmitter. In this example,
pressing
will select the chirps ON setting and the siren will chirp 1 time.
Pressing
will change the programming to the chirps OFF setting and the
siren will chirp twice. (See
System Features Menus
section of this guide.)
NOTE: For features with more than 2 settings pressing
will toggle through
all the two-chirp settings and emit the corresponding number of chirps.
6. R
Reelleeaassee tthhee V
Vaalleett//PPrrooggrraam
m B
Buuttttoonn..
Once a feature is programmed:
➤
➤
Other features can be programmed within the same menu.
➤
➤
Another menu can be selected.
➤
➤
The learn routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the Valet/Program button the number of times necessary to advance from the
feature you just programmed to the next one you want to program. Pressing the button more
times than than the final feature number will wrap around to the beginning again. For example,
after pressing 13 times for the final feature in menu 1 another button press will be feature 1.
2. Then press the Valet/Program button once more and HOLD it.
