Vip2 VK2-1080VRD3V9 Installation And User Manual Download Page 12

Page: 12 / 77

VK2-1080VRD(IR)3V9(F) manual V1.0



Base Installation

Drill mounting and cable holes in the place (ceiling) to which this dome camera is to be installed

using the supplied template sheet.

Warning

: The total mass of the main unit is approx 1.3kg. Check whether the ceiling to which the

Dome Camera is installed is strong enough to hold the unit mass. If not, the Dome Camera could
fall, causing injury.

2. Attach the safety wire for securing the dome camera to ceiling.

3. Extract each wire through the cable hole, connect communication lines.

4. Unlock torx screws (4x) the dome cover and fix the dome case firmly with supplied mounting

screws (4x), plastic anchors (4x), O-Rings (4x).

5. Adjust desired focus and scene by turning and moving the hemisphere by hand.

6. Lock the housing cover with torx screws (4x).

Summary of Contents for VK2-1080VRD3V9














































































Search results

Summary of Contents for VK2-1080VRD3V9

Reviews:

Related manuals for VK2-1080VRD3V9

Brands by name

Popular brands

Vip2 VK2-1080VRD3V9, Installation And User Manual

Search results

Summary of Contents for VK2-1080VRD3V9

Reviews:

Related manuals for VK2-1080VRD3V9

Brands by name

Popular brands