Vip2 VK2-1080VRD3V9 Installation And User Manual Download Page 3

Page: 3 / 77

VK2-1080VRD(IR)3V9(F) manual V1.0

Apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

CAUTION

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE

EQUIPMENT.

CE COMPLIANCE STATEMENT

WARNING:

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Summary of Contents for VK2-1080VRD3V9














































































Search results

Summary of Contents for VK2-1080VRD3V9

Reviews:

Related manuals for VK2-1080VRD3V9

Brands by name

Popular brands

Vip2 VK2-1080VRD3V9, Installation And User Manual

Search results

Summary of Contents for VK2-1080VRD3V9

Reviews:

Related manuals for VK2-1080VRD3V9

Brands by name

Popular brands