6
Crucial evidence. Always.
SLR-A45 Series
| Solar Surveillance
2.1 Mounting the solar panel to the pole
1. Drill an 8mm hole in the pole (minimum 15cm down from the top of the pole) on the same side
that the camera will be mounted. This is for the solar panel cable to run through. The position
of the hole will vary depending on what position on the pole the camera is to be mounted.
2. Feed the figure 8 cable connected to your solar panel through that hole
3. Place the solar panel bracket on top of the pole.
4. Securely fasten the included grub screws to the bracket. Tighten the locking bolts to prevent
the grub screws from loosening.
(Fig. 2.1b)
2. Installation
8
mm
Fig. 2.1a
Solar panel power cable drill location
Fig. 2.1b
Installed grub screws
