10
Crucial evidence. Always.
SLR-A45 Series
| Solar Surveillance
4. Run the power cable coming from the solar panel through one of the cable holes of the junction
box.
5. Carefully
connect the solar panel power cable to the terminal block
(Fig. 2.3e)
, with the
red
wire connecting to +
and the
black wire connecting to -
.
(Fig. 2.3f)
Fig. 2.3f
Solar battery cables connected to terminal block
Fig. 2.3e
Terminal block
Caution:
Do not allow the negative and positive power supply wires from the solar
panel to touch (short circuit)
- this will cause the lithium polymer battery to enter protection
mode and output voltage will drop to 0V.
The only way to recover from this is to disconnect and then reconnect the battery inside the
panel - Please contact VIP Vision™ for further details.
