17
www.vip-vision.com
SLR-A45 Series
| Solar Surveillance
Note:
Intervals
are periods of time set in solar panel settings that occur after the sun sets.
These periods can be set in 1 hour intervals, with a min. of 0 and max. of 3 Intervals overall.
Daytime
operation
Interval
1
Sunset
Interval
2
Interval
3
Daytime
operation
4. Adjust the following settings:
5. Point the remote control at the solar panel’s black sensor and press
Send
to update the solar
panel with your new configuration. If the face symbol changes to a smile, the configuration
settings were sent succesfully.
Note:
To change solar panel settings back to
factory default, set Re-Deflt to YES
The LED light has now been configured to activate at night when motion is detected
(as shown in the diagram below):
3. Point the remote control at the solar panel’s black sensor and press
Param
(Parameters) to open
the settings editing menu.
•
Use the
+
and
-
keys to scroll.
•
Press
Set
to begin editing values. The value should start flashing.
•
Use the
+
and
-
keys to edit the value while it is flashing.
•
Press
Set
again to confirm and stop editing.
•
If the remote enters sleep mode from inactivity, press
backL
to turn it back on.
Setting
Suggested
Value
Description
S-Time-1
14H (Hours)
The duration of Interval 1. 14H sets the LED to be active all night.
S-C-Pow1
10%
% of LED-Cur power provided to the LED upon motion detection
during Interval 1. Remains active for the duration of S-D-Time.
10% sets the LED to 10% brightness.
S-L-Pow1
0%
% of LED-Cur power provided to the LED after the last detected
motion and S-D-Time has elapsed, during Interval 1. 0% sets the
LED to turn off.
S-Time-2
0H
The duration of Interval 2. 0H skips this interval.
S-Time-3
0H
The duration of Interval 3. 0H skips this interval.
LED-Cur
0.15A (Amps)
LED driven current. Can be set from 0.15A to 1.1A.
Warning: Do not exceed 1.1A, as this can damage the LED.
S-D-Time
20s
Duration which the light stays on for after last detected motion.
Daytime operation
(Light off)
Interval 1
14 hours
(Motion activates light at 10%
brightness for 20 sec)
Sunset
Daytime
operation
