Vinteck
V-10 CLIPPER
pag.9
Edizione 01 revisione0
6- USE AND PROGRAMMING OF V-10 CLIPPER. MIDI MANAGEMENT
FUNCTIONS OF “MD” BUTTON
MD button
Make selection between LOOP and PROGRAM function of buttons 1 to 10
BLU LED “L” ON buttons 1 to 10 make direct activation of single loops
WHITE led ON button 1 to 10 recall programs
Other function:
While in programming mode MD button gives SAVE function, then close procedure.
Holding pressed MD with WHITE LED “P” on MIDI MAPPING function is activated.
Holding pressed MD with BLUE LED “L” on V10 goes in GLOBAL.
BUTTON “UP” and “DW” FUNCTIONS
UP BUTTON
With WHITE LED “P” ON increments the banks, from 0 to 11, if banks are active.
Other functions
In programming mode allows input in “control change assign to patch”
With BLUE LED “L” ON, holding pressed allows access to “
BANK ACTIVATION
” function.
DW BUTTON
With WHITE LED “P” ON decrements the banks, from 0 to 11, if banks are active.
Other functions
In programming mode allows input in “PATCH NAME ON DISPLAY
”
MUTE Function
MUTE (silence oc pedalboard, with TUNER out Active) is activable pressing DW while in LOOP
MODE
MUTE is also assignable to any patch, if needed.
