manualshive.com logo in svg

Vinteck V-10 CLIPPER, User Manual

Share
Download
Vinteck V-10 CLIPPER User Manual Download Page 13

Vinteck  

                                 V-10  CLIPPER  

                                                    pag.13

  

 

Edizione 01 revisione0 

 

 

PATCH  PROGRAMMING 
 

Available programs are 100. 10 patch for 10 banks. 
On any programs (patch) it is posssible to assign: 
 
-

 

Any combination on/off  of  10 loops 

-

 

Any combination on/off  of  4 swicth 

-

 

buffer on/off 

-

 

out A , out B 

-

 

MUTE ( when MUTE is programmed no signal comes out from V-10 Clipper) 

-

 

MIDI program change (1-128) and out channel (1-16) 

-

 

Up to  5 Control Change (1-128) e related midi out  channel OUT (1-16) 

 

Programming Loops, switches, buffer, mute and A/B out 
 

Whit white led  “P” ON (selection with MD) 
Hold button of choose program (from 1 to 10) . Keep it for about 3 seconds. 
Blinkin of white led means that V-10 is in programming mode. 
Press button of loops to be activated. Relative blue led will ON to show selection. 
To select switches 1-4 keep pressed relative buttons (1, 2, 3, 4) for about 3 seconds up to red LED 
switch light ON. 
For BUFFER patch activation or deactivation press 7 and keep up to GREEN led come on or off . 
For MUTE patch activation or deactivation press 7 and keep up to GREEN led come on or off . 
OUT A and OUT B (relative to OUT L and OUT R in wiring) are always open (yellow led on)  
To switches them OFF keep them pressed up to yellow leds comes OFF 
Save and exit with  MD

 

 

Chain up to 5 Control Change to one patch 

 
While in programming of   patch (WHITE LED LED BLINKING) press button UP. 
Orange led will blink, to confirm assign procedure. 
Pressing buttons 1 to 5 control change pre-assigned in GLOBAL  (see  GLOBAL 5), CC are chained 
to patch program. 
Display show CC 1 2 3 4 5 , followings preset done. 
Save and exit with  MD

 

To complete save procedure press once MD 
 

PRESET NAME 

 
While programmin (white led “P” blinking ) press DW 
Procedure is similar to “sms text on phone” 
 
Display show number of program (ex 001) followed by x…… 
Use the 1-10 buttons, following indication under button ( ex. 1= ABC1) 
As soon as selected one letter display goes on following. 
Max number of characters is 7 for any patch. 
Save and exit with  MD

 

To complete save procedure press once MD 
 
 
 
 

Summary of Contents for V-10 CLIPPER

















Reviews:

No comments

Brands by name

Popular brands

Load more brands