Vinteck V-10 CLIPPER, User Manual

Page: 10 / 16

Vinteck
V-10 CLIPPER
pag.10
Edizione 01 revisione0
GLOBAL FUNCTION
GLOBAL allows predefinition of following operative parameters, as in following table.
But
ton
FUNCTION COMMAND
1 COMMAND 2 VALUE OUT
SAVE DEF
A
ULT
1 MIDI in channel UP DW 0 – omni
1- 16 MD 0
2 MIDI out canne, MASTER UP DW 1-16 MD 1
3 MIDI numbering 0-127 / 1-128 UP DW 0 - 1 MD 1
4 External Tap Tempo
Control Change UP DW 0-127 MD 80
5 Control Change assignament to
buttons 1 2 3 4 5 P1,P2,P3, P4,
P5
UP / DW P6-CC nr 0-120 MD 000
P7- OUT channel 1-16 MD 1
P8- CC value 0-127 MD 000
6 External expression pedal
Expression pedal calibration
Values assigament P1,P 2, P3
UP, DW P1- pedale value 0-255 MD 255-
255
P2- LOW limit 0-127 MD 000
P3- HIGH limit 0-127 MD 000
7 Buffer ON / OFF global UP, DW P10 MD OFF
8
9 Switch 1, 2, 3 e 4: latch, single
shot, dual shot UP, DW
1,2,3,4 LATCH
SINGLE SHOT
DUAL SHOT MD LAT
CH
10 BANKS activation UP, DW 1-10 ACTIVE
OFF MD 1-on
GLOBAL FUNTION ENTER
With blue led “L” press and hold MD for 4 seconds
Display show GLOBAL
Press button corresponding to wanted function
1- MIDI input channel
Display show MIDI IN followed by a number from 00 to 16.
00 is OMNI, all channels ON.
Make selection with UP and DW (down).
Save and exit with MD
2- MIDI output channe
Display show MIDI OUT followed by a number from 1 to 16
Make selection with UP and DW (down).
Save and exit with MD
Nota: this selection is general, may be changed for any control change