Vinteck
V-10 CLIPPER
pag.5
Edizione 01 revisione0
MN ST
MONO STEREO switch. (in MONO connections 9R-R/S e 10R-R/S (right canne) are
deactivated, only left channels works. OUTPUTS A and B got same signal coming fron 9 and 10
left loops.
EXT SW
external tap tempo temporary input
Exd
expression pedal inputo (25 Kohm raccomended)
S1-2-3-4
Normalli Open contacts. To be use for amp channel, or any similar application.
OUT R OUT L signal outputs. OUT L = OUT A, OUT R = OUT B (on pedals indicated as A and B)
- LOOP1-10
loops managed by buttons 1 to 10
S
SEND Segnal to input of effetc
R
RETURN Segnal back from effect.
- X LOOP
fixed llops. Usable for send/return of alway active pedals (in ex volume pedal)
See schematics. .
- IN
Guitar or bass INPUT
TUNER
Tuner output. Always on even in MUTE.
PEDALBOARD
leds show:
- 1-10 BLUE: loop 1 to 10
- S 1-4 RED switch on/off 1, 2, 3 AND 4 .
- MUTE orange MUTE on.
- BFR GREEN buffer on
OUT A e
OUT B YELLOW outputs A (LEFT) and B (RIGHT) ON
- P
WHITE : PROGRAM FUNCTION ACTIVE
- L – BLUE. LOOP function active
- C
ORANGE shows a control change function active
Buttons 1-10 got dual function: activation of single loop or recall of programs. While in programs mode button
allows to program the switches 1-to 4, the buffer, the A and B out and may recall as well up to 5 control changes
and MIDI functions.
