Vintec AL-V40BVC, User Manual

Page: 9 / 20

V20BVCBK 9
User Manual
TYPES OF REGULATION
Please note that, depending on the loading and settings chosen, it takes about 24 hours for
the Beverage Center to see the temperature stabilizing.
During this time LED seems to move erratically. It is normal and this process occurs
whenever the setting is modified and/or whenever a large amount of bottles are added to
the unit.
TEMPERATURE SETTINGS
Important: The LCD displays, by default, the actual internal air temperature.
The temperature settings are pre-set at the factory setting of 5 ºC. In the event of a power
interruption, all previous temperature settings are automatically erased and it will revert to
the preset temperature settings.
It is important to understand that there is a difference between the air temperature inside
the Beverage Center and the actual temperature of the Beverage : You will need to wait
approximately 12 hours before noticing the effects of temperature adjustment due to the
critical mass within a full Beverage Center.
Once the temperature is set, it is strongly advised not to toy with it or adjust frequently.
The thermostat will maintain the temperature inside the Beverage Center within a +/-
2.5ºC range. But the thermal inertia of the beverages and the glass is such that, within this
temperature range, the actual temperature of the Beverage will only fluctuate 0.5ºC to 1ºC.
The controls of your beverage center
Adjust the desired cooling temperature by pressing the UP or DOWN buttons. Each
depression of the button will scroll through the available temperature settings in
increments of 1 degree Celsius. The temperature setting can be adjusted from 2º to 10º
To visualize the “set” temperature, press and hold the UP or DOWN buttons, the “set”
temperature will temporarily “flash” in the LED display for 5 seconds.