8
901189 REV D 02/02/17, INST 55-59 CHEV P-UP w/ STANDARD CONTROLS EVAP KIT PG 8 OF 24
Defrost
Duct
62144-VCE
(2) #8 x 1/2”
Pan Head
Screws
Figure 4
Figure 3
Defrost
Duct
62144-VCE
Evaporator
Rear Bracket
643082
(2) 1/4-20 x 1/2”
Hex Bolts
(Supplied on Evaporator Sub Case)
ECU Module
#6
O-ring
(2) 1/4-20 x 1/2”
Hex Bolts
(Supplied on Evaporator Sub Case)
#6 Liquid Line
092160
Defrost Duct Installation
Install the driver and passenger side defrost ducts using (2) #8 x 1/2” pan head screws as shown in Figure 3,
below.
1.
Bracket & Evaporator Hardline Installation
1.
2.
On a workbench, install the evaporator rear bracket using (4) 1/4-20 x 1/2” hex bolts (supplied on the
evaporator sub case) (See Figure 4, below).
Install the hardlines with properly lubricated O-rings (See Figure 4, below, Figure 5, Page 9, and Figure 11,
Page 12).
