6
901189 REV D 02/02/17, INST 55-59 CHEV P-UP w/ STANDARD CONTROLS EVAP KIT PG 6 OF 24
Figure 1
Core Support
Cover
Horns
Battery
Battery
Tray
Engine Compartment Disassembly
1.
2.
3.
4.
5.
6.
7.
NOTE: Before starting the installation, check the function of the vehicle (horn, lights, etc.) for proper
operation, and study the instructions, illustrations, & diagrams.
Perform the Following:
Disconnect the battery.
Remove the battery and battery tray (retain).
Remove the top cover on the radiator core support (retain).
Remove the OEM fan & fan shroud (retain).
Drain and remove the radiator (retain).
Remove the passenger side horn (retain).
Remove all OEM heater hoses (discard).
Condenser Assembly and Installation
Refer to separate instructions included with the condenser kit to install the condenser.
Binary switch installation (Refer to condenser instructions).
1.
2.
Compressor and Brackets
Refer to separate instructions included with the bracket kit to install the compressor and bracket.
1.
