6
901091 REV A 3/29/12, INST 1968 CUTLASS wo AC EVAP KIT PG 6 OF 25
DISCONNECT BATTERY
BATTERY, BATTERY TRAY (RETAIN)
DRAIN RADIATOR
OEM BLOWER MOTOR ASSEMBLY
TO REMOVE THE OEM BLOWER MOTOR ASSEMBLY (UNDER HOOD) AND THE
OEM HEATER ASM (UNDER DASH) THE FACTORY MANUAL INDICATES DOING THE
FOLLOWING,
REMOVE RIGHT INNER FENDER.
OEM HEATER HOSES (DISCARD). SEE FIGURE 1.
OEM HEATER WIRING/VACUUM HARNESS MOLDED GROMMET. SEE FIGURE 1.
INNER
FENDER PANEL
HEATER HOSE
CLAMP
OEM
BLOWER MOTOR
ASSEMBLY
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS,ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS, & DIAGRAMS.
ENGINE COMPARTMENT
REMOVE THE FOLLOWING
FIGURE 1
CONDENSER ASSEMBLY & INSTALLATION
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE CONDENSER KIT TO INSTALL THE
CONDENSER.
BINARY SWITCH INSTALLATION (REFER TO CONDENSER INSTRUCTIONS)
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE BRACKET KIT TO INSTALL THE
COMPRESSOR BRACKET.
IN MOST INSTANCES THE BELT LENGTHS WILL REMAIN THE SAME.
COMPRESSOR & BRACKETS
PULLEYS
