- 6 -
II. Component Access
1) Removing the Outer Cover
1. Unplug the cooling unit or disconnect power.
2. Remove the cooling unit from the wine enclosure.
3. To remove the outer cover, remove all screws from each side.
Figure 2-2
2) Removing the Inner Styrofoam
Once the outer cover is removed, this will expose the inner styrofoam pieces.
The top large styrofoam seals off the condenser and evaporator fan
compartments. To gain access to the other components, the styrofoam will need
to be removed
.
To separate the top styrofoam, a knife can be used to cut along
the seam and through the seal. Take care as not to damage any wirings or the
upper middle and side styrofoam pieces.
Summary of Contents for WINE-MATE VINO3500HZD
Page 2: ...1 SAFETY INFORMATION...
Page 8: ...7 Figure 2 3 Figure 2 4...
