７
Step 4: Unscrew the two screws (No1-2), which is hided at back of Control Box
(Figure 10)
;
Step 4: inserting Phillips Screwdriver into the hole as following figure, and loose the 2 screws (No.3-4) a little (about
2mm away) .
(Figure 10-1);
B
A
Screw
(at back of PCB Box)
D
C
Screw
Phillips
Screw Driver
８
Step 5: Pull Control Box put.
(Figure 10-2);
Caution
:
Unplug PCB Terminal carefully before pulling Control Box Out, which is hided back of Control Box;
----Control Box after took out.
(Figure 11)
;
Terminal
