５
----Inside view of unit after Baffle Board and Control Box took out (Figure 6).
2.For BU-58
Step 1: Lift up Shelf and pull it outwards one by one
(Figure 7)
;
Capillary
Solder Joint
Discharge
(Low Pressure)
Solder Joint
Evaporator
Stopper
Shelf
６
Step 2: Unscrew the 5 screws (No.1-5) on Separator Board Cover one by one
(Figure 8)
Step 3: Pull Baffle Board out
Caution
:
Unplug Fan Connector carefully before pulling Baffle Board Out, which is hided back of Fan;
----Inside View of unit after Baffle Board took out.
(Figure 9)
;
T1
(
Temp.Sensor)
Discharge Tube
(Lower Pressure)
Solder Joint
Capillary
Solder Joint
