24
7602050
FIG.29
FIG.23
FIG.24
FIG.25
FIG.28
FIG.27
FIG.26
4.10-
Using the shorting links (Fig. 28) or toggle switch
(Fig. 29), drive the power pack onto the track. The
power pack should be driven to a position approximately
half way between the top and middle foot.
4.11-
Fit the top limit switch and over-run microswitch
stop to the top of the track as shown in (Fig. 30).
NOTE
: The shorter (square limit switch) must be fitted
in the top channel – failure to do this correctly could
damage the lift.
4.12-
Fit the top end cap to the track as shown in (Fig.
26) and tighten the grub screws to secure it.
