Vimar Arke 19493, Instructions Manual

Page: 9 / 38

ENGLISH - 7
LED indicators
• blinking orange: code transmission
• green: system off or interface in off zone
• red: system on or interface in active zone
The remote control has the function of a connector; in addition, for
button 3 it is possible to select:
PANIC BUTTON function with audible warning: the radio interface
must be configured in zone 31. In this way, on pressing the PANIC
button the siren is activated.
PANIC BUTTON FUNCTION WITHOUT AUDIBLE WARNING but
with message: the radio interface and an actuator must be configu-
red in the same zone from 1 to 30. The actuator must be connected
to a channel of the dialler. In this way, on pressing the PANIC button
the message is sent.
MANAGEMENT FUNCTION: the radio interface and an actuator
must be configured in the same zone from 1 to 30. In this way, on
pressing the PANIC button the state of the actuator is switched over
(one-position stable actuator).
The various PANIC functions are mutually exclusive.
To silence the sirens turn the system on and off with the remote control
by pressing the ON (1 and 2) and OFF buttons in sequence, or on the
control panel with “Alarm Reset”
Configuring the remote control
- Prepare the control panel for configuring the radio-frequency devices
(see the control panel manual).
- Press remote control buttons 1 and 2 together.