Vimar Arke 19493, Instructions Manual

Page: 4 / 38

2 - ENGLISH
Radio interface
The radio interface allows using the radio frequency devices to
extend coverage in places or accesses where it is not possible to
add any cables and devices via BUS. In addition it permits using
one or more radio controls as a key to switch the system on/off.
The device turns the system on and off (completely or the asso-
ciated partitioned zones) after receiving the code emitted by the
remote controls.
Iì’t is supplied in the following versions:
20493 : 2 Eikon modules
19493 : 2 Arké modules
16943 : 2 idea modules
14493 : 2 Plana modules
Technical characteristics
- Rated supply voltage (Vn): BUS 20-30 V d.c.
- Protection class: IP30
- Operating temperature: -5 -- +45 °C (for indoor use)
- Installation: flush or surface mounting (with surface mounting box
09975…)
- Type of protection: against opening and removal with passive infrared
sensor built in
- Consumption: 20 mA typ
- Frequency of reception and transmission: dual at 433 MHz and 868 MHz
- Configuration button
- Indicator LED
- It has two terminals for the polarized connection to the bus (+ and –).
- The receiver is governed, for turning the system on and off and parti-
tioning it, by one or more remote controls with over 65,000 possible
combinations.
- Maximum number of radiofrequency devices that can be stored: 40
for each radio interface
- Maximum number of radio interfaces that can be installed in a
system: 4.
Idea Eikon
Plana
Arké