68
Graphic User Interface (GUI) for IP Speed Dome
EN
5.4.2 Alarm Input
To set sensor alarm (alarm input)
1 - Go to Config
Alarm
Alarm In to set alarm trigger.
- Set the alarm type, alarm holding time and sensor name.
- Enable alarm.
- Set alarm trigger options. The setting steps are the same with that of motion detection.
Please refer to motion detection chapter for details.
- Click “Save” to save the settings.
If there are many sensors, you may use “Copy” button to quickly apply settings to other sensors.
2. Set the schedule of the sensor alarm. The setting steps of the schedule are the same with that of motion detection.
Please refer to motion detection chapter for details.
5.4.3 Alarm Out
1 - Go to Config
Alarm
Alarm Out menu as shown below:
2 - Select alarm holding time and alarm name at the “Alarm Holding Time” and “Alarm Out” pull down list box respec
-
tively.
3 - Click “Open” to trigger alarm output. Click “Close” to stop alarm output.
4 - Press the “Save” button to save the settings.