62
Graphic User Interface (GUI) for IP Speed Dome
EN
5 Remote Configuration
5.1 System Configuration
The “System configuration” includes four sub-menus: Basic Information, Date and Time, Local Config and SD Card.
5.1.1 Basic Information
In the Basic Information interface, you can check the relative information of the device.
5.1.2 Date and Time Configuration
Go to Config
System
Date and Time. Please refer to the following interface.
4.6 Load Default
There are three menus, including master reset, master clear and system reboot.
(Master Reset): Restore the camera state and active menu to factory default but do not clear those parameters such
as preset, cruise.
(Master Clear): Restore the camera to factory default.
(System Reboot): Reboot the camera.
You can select the time zone and DST as required.