53
Graphic User Interface (GUI) for IP Speed Dome
EN
4.2.1 Auto PT Flip
Select Auto PT Flip and then click
to set up the menu on the right; click
or
button to select On/Off. If “On”
is selected, please click
button to return to the menu on the left and click
button to select Exit. Now, you will
see the remote preview interface. (The ways to go to sub-menu, return or exit to the main menu in the following settings
are similar to the above-mentioned steps. The following contents will not introduce it in details).
After you exit the main menu, press and hold
button to let the speed dome move to the bottom so that the dome
will auto flip.
4.2.2 Language Setup
English or Chinese menu can be selected.
4.2.3 RS485 Setup
Go to System Setup
RS485 Setup as below:
(Dome ID): The available range is from 001 to 255.
(Protocol): PELCOD or PELCOP is selectable.
(Baud Rate): The baud rate is selectable from 1200 to 9600bps.
4.2.4 Date Setup
Go to System Setup
RS485 Setup as below:
1 - Set the date and time by clicking the direction button.
2 - Select STORE to save the setting.
4.2.5 Title Setup
Go to System Setup
Title Setup as below: