58
Graphic User Interface (GUI) for IP Speed Dome
EN
4- Press iris – to switch menu mode and PTZ mode. And then set the position of the preset by clicking the direction
buttons.
5- Set the title by clicking
or
button.
6- Save the setting.
4.4.2 Cruise Setup
Go to Dome Function
Cruise Setup menu as below:
In this interface, by programming presets in cruise list in advance, the system will keep calling those presets at the set
time in sequence when executing cruise command so that non-stop monitoring between multiple important positions
can be achieved. Setting steps are as follows:
1 - Select the cruise number.
2 - Edit the current cruise. This camera supports 8 cruises and 16 presets for each cruise. Go to “Edit Cur Cruise” menu
as shown below:
Set the preset and time. The preset ranges from 001 to 255 and the dwell time is from 05s to 240s.
3 - Run the current cruise. The camera will automatically keep running according to the cruise you set until new com
-
mand is received. The corresponding operating information will display on the screen when the camera is running.
4 - Select STORE to save the setting.