32
: to copy the entire time program for the current day to the next day (useful for repli-
cating working days or holidays).
: to move on to program the next day without making a copy of the day you have
just set (useful when switching between programming working days and holidays).
: to finish programming.
Touch
to confirm the selected option.
9.6 Unit of measurement setting
This menu lets you set the unit of measurement used for the temperature (°C or °F)
Using
and
select the desired unit of measurement and confirm with
.
9.7 Calibration setting
This menu lets you "calibrate" the temperature read by the timer-thermostat.
Using
and
, you can add or subtract (at intervals of 0.1°) a fixed amount from the temper-
ature detected by the timer-thermostat to make it equal, for example, to that of a sample thermometer.
CAUTION: For correct calibration it is recommended to wait until the timer-thermostat has been on
for at least 1 hour in a room at constant temperature.
Tap
to confirm your choice.
9.8 External probe setting
This menu lets you configure how to use the external temperature probe (installed according to the
instructions in par. 4 .2)
Using
or
, you can select the following options:
•
OFF
: the external probe (although physically present) is ignored by the device.
•
Adjustment
(the measured temperature flashes): by enabling this function, the thermostat will regulate
the temperature of the environment based ONLY on the temperature detected by the external probe (the
temperature measured by the thermostat is ignored). The temperature shown on the display will be that
of the external probe identified by the
icon.
•
Display
(the temperature measured by the thermostat and that of the external probe are shown alter-
nately on the display): the external probe is only used to display the temperature in another environment
.
On standby the display will alternate views of the internal temperature (measured by the thermostat) and
external temperature (measured by the probe) and identifiable by the icon.
•
Limitation
(the icon
flashes): mode used for systems with underfloor heating.
In the associated submenu you set the limitation temperature, that is the one, read by the external probe
immersed in the screed, that is considered an excessive temperature. If this threshold temperature is