12
The illumination of the LEDs corresponds to a precise function, as shown in the following table:
Left module
Central module
Right module
Upper pushbutton
Always off
High sensitivity
(default value)
LED brightness in standby
Lower pushbutton
Always off
Low sensitivity
LED brightness in standby
• The LEDs of the central module indicate the sensitivity of the touchscreen when the device is used in combination with a cover plate; if the upper centre LED
is on, sensitivity is high, and if the lower centre ED is on, sensitivity is low.
To select the desired behaviour, simply press the relative pushbutton (the two central pushbuttons are mutually exclusive).
• The LEDs on the right module indicate the brightness of he the LEDs in standby; pressing the upper right pushbutton increases the brightness, while pressing
the lower right pushbutton decreases it.
The available options are:
LEDs off
,
minimum brightness (default)
,
medium brightness
,
maximum brightness
.
The brightness of the LEDs changes immediately to show the new setting.
Once all the desired options have been selected, long press the lower configuration button to save the settings to memory.
N.B.
If no operations are performed within the timeout of 10 s, the device will quit the setup configuration procedure without saving any changes made.
Example.
The device illustrated below is set to low sensitivity and, when in standby, the LEDs illuminate with minimum brightness.
5.2.2 Setup with rocker switch action for roller blinds
1. Long press the lower configuration button.
2. Short press the upper configuration button; the device will illuminate all the LEDs with the colour white, displaying the functions currently saved to memory.
The illumination of the LEDs corresponds to a precise function, as shown in the following table:
Left module
Central module
Right module
Upper pushbutton
Always on
Always on
Always on
Lower pushbutton
Rocker switch operation
Rocker switch operation
Rocker switch operation
The lower LEDs indicated whether the rocker switch operation for roller blind control is enabled on the respective module; if the lower LED is illuminated, the
module will act as a roller blind rocker switch, and if the LED is off, the module will operate with two independent pushbuttons.
To select the desired behaviour, simply press the relative lower pushbutton.
Once all the desired options have been selected, long press the lower configuration button to save the settings to memory.
N.B.
If no operations are performed within the timeout of 10 s, the device will quit the setup configuration procedure without saving any changes made.
Short press the configuration button to return to the standard Setup phase.
Device configuration
