8
1.5 Secure Commissioning
Before the secure download of configuration setting and/or Individual Address can start, the individual Device Certificate of 01548 must have been added to the ETS
project . To add it, the ETS project must be password-protected .
A Secure download is only possible after activation of Secure Commissioning .
Activation of Secure Commissioning demands the individual Device Certificate .
Device Certificates can only be added to an ETS project when it is password-protected .
When no project password is set, Secure Commissioning cannot be activated . ETS projects with having Secure Commissioning and/or Security set to active always
require pre-setting a project password . Having no project password set on activation of Security, the ETS then asks to type it in .
Figure 3: Set Project Password
The individual Device Certificate always is enclosed with the KNX Secure product . To keep the product configurable by the user, it is important to make sure the
Device Certificate cannot be lost (please note chapter 1 .7 Safekeeping of Device Certificate) .
1.6 Important Notes
It is recommended to participate the standardized courses of a KNX-certified training center before installing, programming, and commissioning a KNX system . Here,
the participant gains the necessary knowledge and skills, also required for troubleshooting, by practical exercises .
Please read this chapter carefully before first use and installation:
1.6.1 Installation and Commissioning
• In the case of damage (at storage, transport) no repairs may be carried out by unauthorized persons
• After connection to the KNX bus system, the device works with its default settings
•
Warning: Do not connect to 230 V. The device is supplied by the KNX bus and does not require any additional external power supply
• The device may only be installed and put into operation by a qualified electrician or authorized person
• For planning and construction of electric installations the appropriate specifications, guidelines and regulations in force of the respective country have to be
complied
• For configuring, use the ETS (or ETS Inside)
1.6.2 Mounting and Safety
• For mounting use an appropriate equipment according to IEC60715
• Installation on a 35 mm DIN rail (TH35)
• Connect the KNX bus line as for common KNX bus connections with a KNX bus cable, to be stripped and plugged into a KNX TP connector
• Do not damage electrical insulations during connecting
• Installation only in dry locations
1.6.3 Maintenance
• Accessibility of the device for operation and visual inspection must be provided
• The housing must not be opened
• Protect the device from moisture, dirt and damage
• The device needs no maintenance
• If necessary, the device can be cleaned with a dry cloth
Product Description