19
5.2 Main Line (IP)
Setting “transmit all” is intended only for testing use . Please do not use for normal operation .
Figure 14: Main Line (IP) Tab Parameters
Table 10: Main Line (IP) Tab Parameter Settings
ETS Parameter
Settings [Default Parameter]
Comment
Telegram routing
(Main line -> Subline)
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route configure
[Group and Physical: filter]
Routing of Physical Telegrams and Group Telegrams can be set to
‘block’ (no routing), ‘filter’ (telegrams are routed according to filte-
ring) and ‘route’ (all telegrams are transmitted) . To set parameters
different as available here, use ‘configure’ .
Group telegrams:
Main group 0…13
transmit all (not recommended)
block
filter
[filter]
Filtering of Group telegrams (with main groups 0…13) can be
configured to route all telegrams, no telegrams, or only telegrams
entered in the filter table .
Group telegrams:
Main group 14…31
transmit all (not recommended)
block
filter
[filter]
Filtering of Group telegrams (with main groups 14…31) can be
configured to route all telegrams, no telegrams, or only telegrams
entered in the filter table .
Physical telegrams
transmit all (not recommended)
block
filter
[filter]
Filtering of Physical telegrams can be configured to route all
telegrams, no telegrams, or only telegrams depending on their
Individual Address .
ETS Database