Villaware TSVLTRSL01, Instruction Manual

Page: 7 / 57

6
EXPANDABLE TOAST SLOT
1
. Your VillaWare
®
toaster includes a useful feature, which allows you to accommodate
breads of up to 5 x
1
5 x
11
.5 cm with one of the slots fully expanded.
2. In order to expand one of the slots, slide the expandable slot
lever to the right or to the left depending what slot you would
like to expand. See Figure 3 .
3. Once the slot is expanded you can then insert the bread you
would like to toast.
TOASTING
1 . Press the bread carriage lever down. The self-centring bread guides
will automatically centre the food for even browning. The bread
carriage lever only serves to move the food up and down. When
pushed down, it will not automatically start the toasting process.
See Figure 4.
2. You can adjust how light or dark the toaster toasts your food. Your
selection should vary based on the moisture content, thickness of
bread and your darkness preference. To select the darkness setting
turn the 7-toast settings dial to your desired level. See Figure 5.
3. Push the start/cancel button " " to initiate the toasting process.
NOTE:
During toasting process, you can use the bread carriage
lever to move the food up to check it and down again to continue
toasting. That will not interrupt the toasting process. See Figure 6.
4. After the desired level of darkness has been reached, the amber
knob light will turn off and toaster will beep 3 times indicating your
food is ready.
WARNING:
THE FOOD WILL NOT POP UP AUTOMATICALLY.
5. Move the bread carriage lever up and carefully remove the toasted food from the bread
slots.
WARNING:
Toasted food can be very hot, especially pastry fillings. Handle with care.
TIP:
To remove food jammed in the bread slots, unplug the toaster and remove the food
once the toaster has cooled down.
WARNING:
Never insert your fingers or metallic utensils into the bread slots.
KEEP WARM
When toasting your foods, you can choose to set the keep warm
function if you desire, which can keep the food warm for up to 5
minutes after it has finished toasting to the selected level. See Figure 7.
In order to use this function, please follow the instructions below:
1 . Follow steps 1 & 2 from the “Toasting” section.
2
. Push the keep warm button to activate this function. This function can be selected prior
or during the toasting process. If you select the keep warm function prior to starting the
toasting process, press the keep warm button once and its light will illuminate. You will
have up to 10 seconds to press the start/cancel button.
NOTE:
If the start/cancel button is not pressed within the 10-second time frame, the
keep warm light will turn off indicating that this function will no longer be activated.
Figure
3
Figure 5
Figure
7
Figure 4
Figure
6