Villager VLP 5320, Original Instruction Manual, Page: 28 / 136

11
How to Use
Intended use
The impact wrench is designed for tightening and loosening the screwjoints. The impact
wrench is only intended for private use and for the specified area of application. All other
use is prohibited.
Non-intended use
The impact wrench is not intended for professional use. The impact wrench must not be
used together with other accessories than those specified by the manufacturer. The
impact wrench must not be modified or used in other ways than the stated intended use.
Assembly and replacing the tool’s accessories
WARNING: Use only supplied or accessories specified by the manufacturer. Tool
accessories can be very sharp and can be in use become very hot - risk of personal injury.
Wear safety gloves when handling tool accessories and bits.
1. Place the tool on a stable surface, for example a work bench.
2. Align the tool accessory on the drive and press it into place until it locks.
3. Check that the tool accessory is properly positioned on the drive.
Switching On/Off
1. Press the power switch to start the tool.
2. Release the power switch to stop the tool.
3. The tool features a variable speed. Press the power button longer to increase the
speed, release slightly to reduce the speed.
Use
1. Hold the tool firmly and put the right socket on the anvil. Fit the socket on the nut and
hold the tool frimly pressed against the nut, so that the socket does not slip. Press the
power switch to start screwing.