Villager VLP 5320, Original Instruction Manual, Page: 26 / 136

9
-
When the battery is fully charged when the green LED stops flashing and remains a
constant green. The red LED will extinguish.
Caution: Do not pull the plug out of the power supply by pulling on the cord. Make sure to
grasp the plug when removing from power supply to avoid damaging the cord.
To remove the battery from the battery
charger:
-
Supporting the battery charger with
hand, pull out the battery from the
battery charger.
Caution: If the battery charger has been in
continuous use it will be hot. Once the
charging has been completed, leave the
charger 15 minutes to cool until next use.
If the battery is charged when it is warm due to battery use or exposure to sunlight, the
battery will not be recharged. If the red indicator flickers rapidly at 0.2 second intervals,
check or and remove any foreign objects in the charger’s battery slot. I f there are no
foreign objects, it is probable that the battery or charger is malfunctioning. Allow
battery/charger to normalise and try again. If a fault remains after trying this then contact
Villager Tools.
Fig. 3