Villager VLP 5320, Original Instruction Manual, Page: 25 / 136

8
WARNING!
The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which
safety precautions are required to protect the user, based on an estimate of exposure in
actual operating conditions (taking into account all stages of the work cycle, e.g. the time
when the tool is switched off and when it is idling, in addition to the start-up time).
BATTERY PACK CHARGING - FIGS. 1 - 2
Important: Only Villager 18V
designated battery packs and
chargers can be used in conjunction
with this product. Use of any other
third party battery packs/chargers
with this product is considered
misuse and will invalidate the
product’s warranty .
Warning! Check the condition of the
charger and battery prior to each
charge. If there is any sign of
damage then do not commence
charging, seek advice from Villager
Tools.
The battery pack is supplied un-
charged and must be charged
before initial use.
To charge the battery pack (8), it
must first be removed from the tool.
To release the battery pack:
-
Press the battery release button (7) and gently slide the battery pack off (Fig.1).
-
Plug the battery charger (9) unit into a 230V/AC supply socket.
-
The red LED (9.1) will illuminate to show the charger has power.
-
Slide the battery into the charger (the battery is shaped to fit into the charger one way
only).
-
After a few seconds delay, the red LED (9.1)will flash to show that charging has begun,
then illuminate solid red.
-
Whilst the battery is charging, the green LED (9.2) will flash, (the red LED will go from
flashing to constant red).
Fig. 1
Fig. 2