Villager VLN 9320, Instruction Manual

Page: 21 / 117

8
Note: Make sure the battery and worklight are lined up correctly. If the battery does not
slide onto the base of the worklight easily, don't force it. Instead, slide the battery out of
the worklight and check the top of the battery and the battery slot of the worklight are
clean and undamaged, and that the contacts are not bent. Then replace battery cover.
REMOVING A BATTERY
• First take off battery cover first the remove the battery from the worklight by pressing
the battery release button on the battery; then slide the battery off the base of the
worklight.
•
Warning: DO NOT try to remove the battery without pressing the battery release button,
otherwise the tool or battery may be damaged.
BASIC TORCH OPERATIONS
ON/OFF SWITCH
Switch the Torch on or off by pressing the On/Off
Switch.
Pump once for HIGH.
Twice for MID.
Thrice foe LOW setting.
Press once more for OFF.
HANGING HOOK
The worklight features a built in hanging hook.
Push upwards to release from the tool body.